Our Products
Brand: PRO-TECH
MPN: KP532411
Tongue & Groove - Parallel
Carbide
Tipped - Tongue & Groove (Parallel)
The cutter is a type of cutter known as a counter-profile cutter. When
properly aligned, it will allow two panels to join together without the use of a
secondary cuttter. The F-profile assists with alignment during assembly and adds
a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) tha..
N$ 1,732.48
Ex VAT:N$ 1,506.50
Brand: PRO-TECH
MPN: KP532011
Tongue & Groove - Parallel
Carbide
Tipped - Tongue & Groove (Parallel)
The cutter is a type of cutter known as a counter-profile cutter. When
properly aligned, it will allow two panels to join together without the use of a
secondary cuttter. The F-profile assists with alignment during assembly and adds
a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) tha..
N$ 1,598.50
Ex VAT:N$ 1,390.00
Brand: PRO-TECH
MPN: KP733040
Spindle
cutter - V - paneling Tongue & Groove
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4" or 1/2" spindle shaft.
The cutter is used for joining paneling to form a "V" groove. Great for ceilings.
KP800020 - 3/4" - 1/2" spacer rings
Important:
Make sure the spindle moulder has a table opening of at least Ø
140mm.
Designed for spindle moulders equipped with either a ..
N$ 3,778.90
Ex VAT:N$ 3,286.00
Brand: PRO-TECH
MPN: KP609411
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.
Take care when ..
N$ 1,098.83
Ex VAT:N$ 955.50
Brand: PRO-TECH
MPN: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that will fit most small and large routers with the correct collet. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.
Take ..
N$ 1,029.25
Ex VAT:N$ 895.00
Brand: PRO-TECH
MPN: KP TGV01
TONGUE & GROOVE THREE FLUTE V JOINT 1/8" x 1/2"..
N$ 2,009.63
Ex VAT:N$ 1,747.50
Brand: PRO-TECH
MPN: KP607441
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that wil..
N$ 1,568.60
Ex VAT:N$ 1,364.00
Brand: PRO-TECH
MPN: KP546
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment during assembly and adds a greater glue surface, resulting in a stronger joint.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that wil..
N$ 1,568.60
Ex VAT:N$ 1,364.00
Brand: TORK CRAFT
MPN: TC991088
Backpack
Colour:
Black
The backpack is an ideal travel companion to store everyday essentials.
Features:
Lightweight, urban style look.
Rigid waterproof base.
Shoulder straps.
Handle on top.
Tork Craft™ company logo...
N$ 1,857.25
Ex VAT:N$ 1,615.00
Brand: TORK CRAFT
MPN: TC991260
Medium tool bag
Size:
400mm x 210mm x 310mm
Application:
The medium tool bag keeps your tools neat and in one place. It is manufactured from
heavy duty nylon to resist tearing.
Features:
A total of 22 pockets.
Shoulder strap...
N$ 669.88
Ex VAT:N$ 582.50
Brand: TORK CRAFT
MPN: TC991265
Small tool bag
Size: 315mm x 230mm x 250mm
Application:
The small tool bag keeps your tools neat and in one place. It is manufactured from
heavy duty nylon to resist tearing.
Features:
A total of 25 pockets.
Shoulder strap...
N$ 559.48
Ex VAT:N$ 486.50
Brand: TORK CRAFT
MPN: TC991340
Large tool bag
Size: 495mm x 265mm x 340mm
Application:
The large tool bag keeps your tools neat and in one place. It is manufactured from
heavy duty nylon to resist tearing.
Features:
A total of 50 pockets.
Shoulder strap...
N$ 783.15
Ex VAT:N$ 681.00